Roger Newman & Sons
Designers & Makers
Soap cutters & Soap Moulds
Melt & Pour Soap Cutters
The Melt and pour cutter will cut loaves or logs into bars of equal size each time, we can make the harp wire spacing, when
you order to cut the size of bar you want.
It can also be made to cut slabs into loaves or logs if you use tray
moulds, before cutting into bars.
Prices from £1,850
including one 17 Wire harp with spacing of choice
Shipping at cost
Time taken to cut a log or loaf of soap into bars is 40 seconds including the time to load and unload the machine
The Melt and pour cutter will cut Melt and pour soaps, cold process, hot process and re made soap .
It will not cut soap
with fibrous additives such as thick stems or loofa.
The Melt and pour cutter is a free standing machine needing only a plug pluged into the home or workshop electricity
supply 240 volt.
It is operated by using two hand levers one on the left hand side of the machine and the other on the right hand
side , this is to enure that the operators hands cannot be at risk. The machine has a perspex door which must be in the closed
position before machine can be started as an extra safety measure.
Models shown slab and bar cutters
Roger Newman & Sons, Byrfon, Gwernogle, Carmarthenshire
Wales, SA32 7RY
Tel 44 01267202355
Copyright©2017 Roger Newman & Sons