Roger Newman & Sons
Soapcraft
Designers & Makers
of
Soap cutters & Soap Moulds
Bar & Loaf Cutters
The hand cutter is a good sturdy machine that will cut cold process soaps to the same dimension each time it is used , we have
been making this cutter since 1998 each to the customers requirements .
Our new models have finer wires to give a finer
cut, we will still supply the 1 mm wire if you wish.
Each machine is supplied with a set of spare wires
Each machine is made to your own requirements the spacing of the wires is your choice.
Hand
Bar Cutters
From
10 Wire £201
12 Wire £237
14 Wire £272
16 Wire £309
Made to any spacing
00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
Block Cutter & Mould.
The Block Cutter is designed to cut, cold process soaps that have been cast in larger tall moulds , the machine which consists of
a cutting harp and HDPE grooved cutting block.
The cutter shown has 4 wires and cuts 8 loaves or logs,ready to be cut into
bars on a bar cutter. This machine is pushed down over the soapblock by hand so when ordering keep in mind how much force will
be needed.
The four wire block cutter can produce up to 112 bars from a single mould.
Roger Newman & Sons, Byrfon, Gwernogle, Carmarthenshire
Wales, SA32 7RY
Tel 44 01267202355
Copyright©2022 Roger Newman & Sons
Price of block cutters
from £201 for 4 wire
cutter
Block cutter moulds made to order
Block cutter mould inside dimensions example
220 mm x 130 mm x 400mm
to produce
128 bars
65 mm x 55 mm x 25 mm Mould cost` £216 each.